No products in the cart.
-
New
Particulate matter sample is pulled by a vacuum pump and concentrated on filter tape spot, the concentrated sampleis advanced to measuring position where between beta raysource and detector. An attenuation signal of beta ray is detected which represents the mass of sample particulate.Particulate concentration can be determined…
BPM-200 Continuous PM10 Monitor
-
New
Blue-green algae are irradiated with excitation light of a specific wavelength, causing them to reach a higher energy state. When returning from this high-energy state to the ground state, they emit fluorescence at wavelengths longer than the excitation light. The intensity of this fluorescence is directly proportional to the…
Blue-green Algae Sensor
-
New
The AQMSPLUS Software is a data acquisition software used for the work control of all analyzers and calibration instruments,data acquisition,remote calibration operation,data communication and other tasks in the monitoring station.
AQMSPLUS Air Quality Monitoring System Software
-
New
AQMS-700 CAPS NO₂ analyzer is an atmospheric environment monitoring instrument based on the optical cavity attenuation phase shift technology (CAPS) which can directly measure the NO₂ concentration in the ambient air and is widely used in the online monitoring of the NO₂ content in the ambient air quality monitoring scene. The…
AQMS-700 CAPS NO₂ Analyzer
-
New
FPI AQMS-650 measures NH₃ in the ambient air, which delivers a stable and precise value. It adopts chemiluminescence technology with an external converter that can combine its use with AQMS-600 measuring NOx; during the measurement, NH 3 will be converted into NO by oxidation. And it also comes with its own developed software.…
AQMS-650 Ammonia Analyzer (NOx,NH₃)
-
New
FPI AQMS-600 NO/NOx analyzer utilizes chemiluminescence technology indicated by US EPA as the federal reference method for monitoring multiple forms of nitrogen oxides.
AQMS-600 NO/NOx Analyzer
-
New
AQMS-550 is equipped with an internally mounted catalytic converter set at 315°C to convert H₂S to SO₂. Bypassing the sample through an SO₂ scrubber which removes any SO₂, the H₂S is converted to SO₂ using this internal H₂S converter and measured using the pulsed fluorescence technique. Principle AQMS-550 H₂S analyzer adopts UV…
AQMS-550 H₂S Analyzer
-
New
AQMS-500 measures the intensity of the characteristic fluorescence released by SO₂ in an ambient air sample contained in the gas chamber when the air sample is irradiated by ultraviolet light passed through the chamber. Removal of Interferences The permeation scrubber acting as hydrocarbon kicker removes aromatic hydrocarbon…
AQMS-500 Sulfur Dioxide Analyzer
-
New
FPI AQMS-450 carbon dioxide (CO₂) analyzer measures ambient CO₂ concentration by employing Non-dispersive infrared (NDIR) with gas filter correlation (GFC) method technology to realize ppm level CO₂ concentration measurement. Principle Infrared energy emitted by light source is passed through gas chamber containing the air…
AQMS-450 CO₂ Analyzer
-
New
FPI AQMS-400 carbon monoxide (CO) analyzer measures ambient CO concentration by employing nondispersive infrared with gas filter correlation method technology. Principle Infrared energy emitted by light source is passed through gas chamber containing the air sample, and the quantitative absorption of energy by CO in the sample…
AQMS-400 CO Analyzer
-
New
The AQMS-350 is used to detect and evaluate the O 3 concentration level of one of the environmental air quality parameters (SO 2 , NO 2 , CO, O 3 , PM2.5, and PM10) based on chemiluminescence technology. This analyzer can measure the concentration of O 3 in ppb~ppm level, with strong anti-interference capability, high…
AQMS-350 O3 Analyzer (Chemiluminescence Method)
-
New
Combine with big data to track, early warn, and forecast the pollution source. Providing effective and timelydecision support for environmental pollution prevention and control.
AQMS-3000 Micro Ambient Air Quality Monitoring System (SO₂, NO₂, CO, O₃, PM₂.₅, PM₁₀, etc.)
-
New
The concentration of ambient ozone is proportional to UV light absorption since there is a significant characteristic absorption for ozone on wavelength of 254nm. Periodical diversion on sample flow passing through the ozone scrubber will generate reference measurement, which is compared with sample measurement to provide…
AQMS-300 O₃ Analyzer(UV Photometric Absorption Technology)
-
New
FPI AQMS-200 dynamic dilution calibrator utilizes two mass flow controllers to perform standard zero and span calibration with up to 4 gas sources.
AQMS-200 Multi-Point Calibrator
-
New
Comparing to the regular station, the compact one covers all advantages but less land area with miniaturization instruments, which is more cost-effective. Being extendable for VOCs or other analyzers, this type of system will be typically installed at tunnel or traffic joints, which needs online monitoring. This system applies…
AQMS-1000M Compact Air Quality Monitoring System(SO2, NOx, CO, O3, PM10, PM2.5, VOC)
-
New
The AQMS-1000 is a standard air quality monitoring station capable of monitoring conventional air pollutants including SO₂, NO, NOx, CO, O₃, PM2.5, and PM10. Its monitoring methods comply with China’s environmental monitoring standards and U.S. EPA certification requirements. O₃ is measured using the UV photometric method, SO₂…
AQMS-1000 Air Quality Monitoring System (SO₂, NOx, CO, O₃, PM10, PM2.5, etc.)
-
New
FPI AQMS-100 provides ultra pure pollutant-free zero air for calibrating zero point of ambient air quality monitor. It consists of air compressing and cooling system, water removal system, gaseous pollutant scrubber system, particle removal and zero gas output system.
AQMS-100 Zero Air Generator
-
New
The system integrates X-ray fluorescence for metal analysis up to 30 elements and a beta-ray attenuation model for particulate mass monitoring. But module will be using the same sample moving sequentially across the detector and would be significantly effective in industry emission tracing.
AMMS-100 XRF Ambient Metal Analyzer
-
New
Mobile air quality monitoring system consists of analysis devices, an automatic sampler, an image acquisition device, and a mobile communication device. Instruments combination can be selected and moved as per requirement, such flexibility enables the mobile station to perform as fixed station as well.
Air Quality Monitoring Mobile (SO₂, NO, NOX, CO, O₃, PM2.5, PM10,etc)
-
New
FPI 3000 Series Water Quality Station is designed for online monitoring of water quality parameters in clean media. Equipped with a probe, controller, and pump, the mini-station can independently collect a water sample, analyze data, and transmit data to the central platform. This water station also can keep its sensor clear of…
3000 Series Water Quality Station