No products in the cart.
-
New
Sample gas passes through denuder, and soluble gas will be analyzed by ion chromatograph first; the aerosol will then be inflated and given into ion chromatography to analyze soluble aerosol.
WAGA-100 Water-soluble Ion Analyzer
-
New
PMS-200M accepts closed-loop response control technology to sample multiple gaseous and particulate samples simultaneously in the atmosphere. It can monitor meteorological parameters such as atmospheric humidity, pressure, temperature and wind speed in real time.
PMS-200M Multi-channel PM Sampler
-
New
PMS-200A is a small flow automatic membrane changer sampler, which can be applied to continuous measuring of PM2.5 and PM10. The PMS-200A system consists of a PM10 cutting head, a PM2.5 cutter, an atmospheric temperature detection unit, an automatic filter replacement unit, a flow control system, and a temperature control…
PMS-200A PM Sampler (PM2.5,PM10)
-
New
The OCEC-100 is an atmospheric organic carbon (OC) and elemental carbon (EC) online analyzer based on the thermal-optical method. It was developed jointly by FPI and Peking University with the objective of addressing the current pollution status of carbonaceous components in aerosols. The instrument combines years of experience…
OCEC-100 Carbon Analyzer
-
New
LAMPAS-3.0 consists of a sample injection system, diameter detector, laser ionization system, and TOF-MS analysis system. Aerosol particles are accelerated into the vacuum chamber via a differential vacuum chamber, the aerodynamic diameter of the particle is detected by the dual laser beam. Meanwhile, ionization laser is…
LAMPAS-3.0 Ambient PM TOF-MS FastTrack System
-
New
Dust from construction, demolition, and traffic can cause a significant impact on local air quality, posing health problems. Hence, dust mitigation monitoring is required at most construction sites. CDMS-1000 is designed with light scattering technology for continuous real-time measurement of particulate concentration along…
CDMS-1000 Dust Monitoring System
-
New
Particulate matter sample is pulled by a vacuum pump and concentrated on filter tape spot, the concentrated sampleis advanced to measuring position where between beta raysource and detector. An attenuation signal of beta ray is detected which represents the mass of sample particulate.Particulate concentration can be determined…
BPM-200 Continuous PM2.5 Monitor
-
New
Particulate matter sample is pulled by a vacuum pump and concentrated on filter tape spot, the concentrated sampleis advanced to measuring position where between beta raysource and detector. An attenuation signal of beta ray is detected which represents the mass of sample particulate.Particulate concentration can be determined…
BPM-200 Continuous PM10 Monitor
-
New
The system integrates X-ray fluorescence for metal analysis up to 30 elements and a beta-ray attenuation model for particulate mass monitoring. But module will be using the same sample moving sequentially across the detector and would be significantly effective in industry emission tracing.
AMMS-100 XRF Ambient Metal Analyzer